{"id":50,"date":"2012-02-24T23:00:22","date_gmt":"2012-02-25T04:00:22","guid":{"rendered":"http:\/\/www.slopeslayer.com\/wordpress\/?page_id=50"},"modified":"2020-09-03T13:06:30","modified_gmt":"2020-09-03T17:06:30","slug":"about-us","status":"publish","type":"page","link":"http:\/\/www.slopeslayer.com\/wordpress\/?page_id=50","title":{"rendered":"KnifeEdge Wing"},"content":{"rendered":"

The best flying wing for combat will be light and have a fast recovery after mid-air contact. Next you need an agile and reliable airframe, which utilizes\u00a0the most durable materials in their most effective configuration, a design that has been tested and proven to outperform the others.\"KnifeEdgePlanVw\"<\/p>\n

GEMS brings you the KnifeEdge wing, a 48 inch marvel of flight! The plane is light and efficient, sport flying is an absolute joy. It will fly in light lift and thermals well too. Since it flies so well it is also one of the\u00a0easiest wings to fly.\u00a0When Dynamic Soaring, this design has a speed limit of around 70 mph. It makes a great DS trainer because of its remarkable durability and penetration.<\/p>\n

This wing design has been tested\u00a0on a half dozen slopes here in Ohio, plus slopes in Colorado (www.rcgroups.com\/forums\/showthread.php?3029527-Western-Colorado-Slope-Challange<\/span>), Indiana, Kansas (http:\/\/midwestslopechallenge.com\/<\/a>), Michigan, Tennessee, and Utah (Soar Utah:\u00a0http:\/\/www.rcgroups.com\/forums\/showthread.php?t=1183248<\/a>).\u00a0One problem though, our test pilots have reported very dry and dusty teeth because they can\u2019t get the smiles off their faces.<\/p>\n

\"KnifeEdge<\/a>

KnifeEdge Photo by Don King<\/p><\/div>\n

KnifeEdge at City View<\/a><\/p>\n

The Wing Kit will be offered at two different fast<\/em> build levels:<\/p>\n

(I) As the “KnifeEdge Wing<\/span>“: which will have the GEMS four element box copolymer main spar systems installed, all cut-outs and wire passages made for your standard gear, all required (top grade) hardware, a four piece GEMS joiner system, coroplast wing tips and Rx hatch, and the Z-bends made at the proper length on the push-rods for you. \u00a0$98.00<\/span><\/p>\n

(II) As the “SlopeSlayer Wing<\/span>” almost ready to cover: this kit has all of the\u00a0above plus a HD switch\/charge jack is included\u00a0and installed and the push-rods are installed.\u00a0The standard Hitec\u00a0servos\u00a0are included\u00a0and installed, an 700mAh\u00a0LiFe battery is included\u00a0and installed. All that is left to do is join the wing\u00a0halves, hinge the elevons, covering, and install the control horns and the coroplast wingtips.\u00a0$186.00<\/span><\/p>\n

Ordering Products:<\/span>\u00a0will be handled with just your email, contact us with a request and we will quote you\u00a0availability\u00a0and cost with a\u00a0PayPal Invoice<\/em><\/span>, you review it, then pay for the items through\u00a0PayPal<\/em><\/span>. You do not need a PayPal<\/em><\/span> account, credit cards will work too. We will never have your credit card information.<\/span>\u00a0\u00a0gems.hdqrs@gmail.com<\/span><\/p>\n

Shipping Kits: Will be quoted per your Postal Code.\u00a0<\/span><\/p>\n

See many detailed photos below:<\/p>\n\n\t\t